SIMPLY | MEASURE
Large inside gauge, 14″–34″
Model SM-1434How to use
- Pick your row. For 14″–24″, leave the bottom slide closed and read the closed row. For 24″–34″, pull the bottom slide out until it stops (extended) and read the extended row.
- Reach both walls. Set the bottom slide’s end against one wall, then pull the top slide out until its tip meets the opposite wall. It stays where you leave it.
- Read. Press the gauge lightly between the walls and read the number at the red index.
- Put it away. Push each slide home until it clicks. Store and hang it with both slides closed.
Read it in place. Take the reading while the gauge is pressed lightly between the walls. Lifted out, the slides can shift a little.
Care
Don’t leave it in a hot car or anywhere above 120°F (49°C). Wipe it clean with a damp cloth.
See which row to read
Set an opening width to see where the slides go and what the gauge shows at the red index.
Reading at the red index
Bottom slide extended. Read the extended row.
Lengths are drawn to scale. Drag the slider to see how the slides move and which row you read.
Specifications
| Measures | 14″–34″ inside openings |
|---|---|
| Closed length | 14″ tip to tip |
| Graduations | 1/16″ |
| Closed row | 14″–24″, bottom slide closed |
| Extended row | 24″–34″, bottom slide extended |
| Body | 345.1 × 85.5 × 12 mm |
| Material | Matte PLA, black with white and red markings |
| Hanging | Two hang holes, at the end and at the center |
| Model | SM-1434 |
Where to buy
Coming to Amazon. This page will link to the listing once it’s live.